Electric LED Fireplace Insert - 60"- Black

Electric LED Fireplace Insert - 60"- Black

• 60" wall-mounted, built-in electric fireplace ideal for new construction and renovations

Features:

• The vent located at the front
  
• Ideal for both new construction/renovations
  
• With the option of wall mount or built-in design and multiple heater and flame settings

Recessed to Wall Installation

1. Select a drywall to open a hole for a fireplace box
   
2. Fix the three anchors in each side of the fireplace box
   
3. Take off the two screws in both sides of the glass panel
   
4. Have two people take the glass panel out of the fireplace box.
   
5. Place it in a soft and clean place
   
6. Have two people move the fireplace box to the wall hole
   

Wall Mounted Installation

1. Select a location that is not prone to moisture and is located at least 36" away from combustible materials
   
2. Have two people hold the appliance against the wall to determine the final location
   
3. Place the unit face down on a soft, non-abrasive surface.
   
4. Remove ethe bracket from the back of the unit by removing the screws
   
5. Mark out location, then mount the bracket(s) onto the wall using the supplied screws.
   
6. This bracket MUST have the hooks facing upward and be level
   
7. With the wall mounting bracket installed, have two people lift the appliance up.
   
8. Insert the two hooks on the bracket into the two slots on the back of the appliance
   
9. Check the appliance for stability, ensuring that the bracket will not pull free from the wall

View the Spec sheet.